OEMOffHighway.com |

Custom Products of Litchfield's 1,500 sq.-ft., zero-degree OPS (operator protective structure) test facility serves the off-highway equipment industry.
• Protective structures for off-highway equipment can be tested to ANSI, ASABE, BS, CEN, ISO, MSHA, OECD, OSHA, SAE, CSA, and various company specific proprietary standards

Grayhill, Inc. introduces a unique vehicle operator interface system, the Series 3D CAN-bus Display and the Series 3J Vehicle Display Controller.

• Together, these two products provide a complete human-machine interface.
• Controller provides means of navigating through the on-screen software
• Large number of input/output ports
• Well-equipped CPU
• High-spec display
• Peripheral controller can be mounted to operator's armrest
• Series 3D integrates a 10.4-inch SVGA LCD with an embedded single-board computer in a rugged and sealed housing
• High-resolution, back-lit display
• CPU can be specified to run either Windows CE or Linux-based operating systems
• Five 'hot key' pushbuttons are placed around the center shaft to quickly pull up the most common functions
• 8-way joystick can be integrated for navigating through on-screen menus

Cole Hersee Co. introduces its new smart battery isolator 48525 and 48530. Ideal for trucking applications, the smart battery isolator prevents loads on the auxiliary battery from draining the starting battery.
• Flexible solution than traditional isolators, not specific to an alternator type
• Reduces charging system workload by not connecting to the auxiliary battery until the primary battery is charged to 13.2 V
• LED status indicator

The Loegering VTS (Versatile Track System) is a complete rubber track undercarriage that bolts directly to a skid steer's standard hubs.

• Forward placement of front idler wheel maintains flotation, stability.
• Provides bi-directional suspension that adjusts independantly side to side.
• Idler wheel placed farther back than rear hub for stability on inclines, side hills.

Truck-Lite's 7 in. LED headlamps are available to the heavy-duty commercial vehicle market.

• Round, white LED Headlamps meet or exceed DOT requirements, all FMVSS pertaining to headlights
• Replace any standard 7-in. round headlight within 24 volt applications
• May be aimed using standard mechanical aiming equipment
• Each headlamp uses ten Luxeon LEDs
• LED light output is brighter than traditional glass beam headlights
• Color temperature of assembly around 5,000 degree K

Caterpillar announces the introduction of the Tier 4 Interim/Stage IIIB technology Cat C7.1 ACERT at Intermat in Paris Nord-Villepinte.

The new engine is a 7.01 liter platform with a power rating of 175-300 hp (130-225 kW) and delivers a peak torque of 944 lb.-ft. (1280Nm). The engine includes a Cat Clean Emissions Module (CEM) aftertreatment system that will meet Tier 4 Interim/Stage IIIB emissions standards.

Equipped with an A5 electronic control unit, high pressure common rail fuel system and a two-stage Smart Wastegate turbocharger, the Cat C7.1 with ACERT Technology delivers low speed response and torque as well as high power density at higher speeds. The C7.1 utilizes the full complement of ACERT building blocks including the CEM and the Cat NOx Reduction System to achieve a significant 90% reduction of PM and a 45% reduction of NOx over current Tier 3/Stage IIIA levels.

Bosch Rexroth redesigns its high-pressure variable pump A4VG for closed circuit applications
• Increased power density
• Nominal pressure: 6500 bar
• Nine nominal parameters
• Redesigned pump case provides manufacturers with a variety of ways to include sensors
• Bowl-shaped case design avoids high-pressure transitions at sealing points, with some sealing points being eliminated entirely

FW Murphy announces the release of the PowerView 750, a fully-modular CAN-based display that can be completely customized around the equipment manufacturer's needs.

• Like Murphy's PowerView 1000 display, the PowerView 750 display integrates electronic engine, transmission and machine information into a VGA LCD flatscreen with full-color graphics
• PowerView 750 display was designed so that each of the primary components can be isolated and custom engineered to each customer's unique specifications
• Customizable to include up to 16 buttons, number of inputs available on the I/O board, shape and color of the bezel, etc.
• Features configuration software that allows total control over screen design - including logos, menus, instrument layout, machine graphics, etc.

Briggs & Stratton Commercial Power offers a full range of proven Vanguard Big Block V-twin engines.
• Horizontal shaft models in the 25-35 gross hp range
• Vertical shaft models in the 28-36 gross hp range
• Overhead valve design
• Full pressure lubrication with spin-on oil filter
• Oil Gard low-oil shutdown system

Racor Div. of Parker Hannifin Corp. releases the new R125 Fuel Filter/Water Separator Replacement Elements, a direct replacement for the 300, 400, 600, and 700 Series Racor Fuel Filters in both the threads for the fuel filter head and for the collection bowl.
• All filter materials and seals are compatible with ultra-low sulfur diesel (ULSD) fuel and B2 to B20 Biodiesel
• Available for order with 2, 10, or 30 micron proven Aquabloc II media
• Flow of 120 gph